All Products

View All >>

VNQ600A13TR

13V N-Channel 1.27mm PMIC VNQ600 28 Pin 13V 28-SOIC (0.295, 7.50mm Width)

Manufacturer: STMicroelectronics
Origchip NO: 761-VNQ600A13TR
Package: 28-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 771
Description: 13V N-Channel 1.27mm PMIC VNQ600 28 Pin 13V 28-SOIC (0.295, 7.50mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Number of Pins	28
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
ECCN Code	EAR99
Resistance	35mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Peripheral Drivers
Max Power Dissipation	6.25W
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	13V
Terminal Pitch	1.27mm
Base Part Number	VNQ600
Pin Count	28
Number of Outputs	4
Output Type	N-Channel
Max Output Current	40A
Operating Supply Voltage	36V
Power Supplies	13V
Interface	On/Off
Nominal Supply Current	6mA
Output Configuration	High Side
Power Dissipation	6.25W
Output Current	25A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	40mA
Input Type	Non-Inverting
Switch Type	General Purpose
Min Input Voltage	5.5V
Max Input Voltage	36V
Output Current per Channel	15A
Ratio - Input:Output	1:1
Voltage - Load	5.5V~36V
Driver Number of Bits	4
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO
Rds On (Typ)	35m Ω (Max)
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max)	2.65mm
Length	17.9mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

VNQ600A13TR Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).In the 28-SOIC (0.295, 7.50mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of VNQ600.A total of 28 terminations can be found in it.For operation, we use the 28 pins.The LED driver has 2 functions.As a result, the maximum output current is reduced to 40A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 28 pins.35mOhm is the resistance of the lighting driver.In this case, the output current is set to 25A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part is powered by 13V.In order to maximize efficiency, the supply voltage should be set to 36V.Its maximum input voltage is 36V volts.There is a minimum input voltage of 5.5V volts for this LED driver.It requires 40mA current to operate.