UCC5618DWPTR

UCC5618DWPTR Overview

A transmission line may also have 18 terminations, which are made using devices matched to its characteristic impedance. 28-SOIC (0.295, 7.50mm Width) is well known for its low package cost in the electronics industry. Tape & Reel (TR)'s packaging follows his material specifications. It is mounted in the way of Surface Mount. A maximum operating temperature of 0°C~70°C should not be exceeded. It is a SCSI-qualified material for standard applications. If you are looking for related parts, you can use Base Part Number UCC5618. There are a number of 28 pins included for specific applications. In terms of 18 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. If you want the supply voltage to be as high as possible, you should maintain it at 4.75V. On the back is a Surface Mount-mount. This falls under Subcategory Bus Terminators. It is common for computers and other communication devices to use pronged contacts, called 28 pins. The 4.75V Power Supplies are necessary for the operation of the system. Here, the resistance is 110Ohm (Ω). As it can operate on a wide range of supply voltages, it is a great choice for a variety of applications. It runs on a minimal voltage of 4V. A voltage of maximum is achieved when 5.25V is maximal.

UCC5618DWPTR Features

18 terminations
Tape & Reel (TR) package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies

UCC5618DWPTR Applications

There are a lot of Texas Instruments UCC5618DWPTR Signal Terminators applications.

• Programmable logic controller
• mainframes
• ESD protection and termination of USB downstream ports downstream ports
• CSU and DSU
• Compact disk drives
• High speed protected termination for digital input with serialized SPI output
• Optical disk drives
• workstations
• Notebooks
• Programmable logic controller and remote input modules