All Products

View All >>

TPS2065DR

N-Channel PMIC TPS2065 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Origchip NO: 815-TPS2065DR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 638
Description: N-Channel PMIC TPS2065 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Feature	Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	70mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	UNDERVOLTAGE LOCKOUT
Max Power Dissipation	585.82mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	TPS2065
Pin Count	8
Number of Outputs	1
Output Type	N-Channel
Number of Channels	1
Interface	On/Off
Analog IC - Other Type	POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current	1A
Output Configuration	High Side
Output Current	1A
Voltage - Supply (Vcc/Vdd)	Not Required
Adjustable Threshold	NO
Input Type	Non-Inverting
Turn On Delay Time	3 ms
Switch Type	General Purpose
Min Input Voltage	2.7V
Max Input Voltage	5.5V
Supply Current-Max (Isup)	0.07mA
Nominal Input Voltage	5.5V
Turn-Off Delay Time	10 ms
Ratio - Input:Output	1:1
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ)	70m Ω
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS2065DR Overview

The package is in the form of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the TPS2065 family.A total of 8 terminations can be found in it.In order to operate, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.With a supply voltage of 3.3V, high efficiency is possible.This LED driver is equipped with a total of 8 pins.In this case, there is 70mOhm resistance in the LED driving board.The output current is set to 1A in this case.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.It has a maximum input voltage of 5.5V volts.It requires 2.7V volts as the minimum input voltage.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.A maximum supply current of 0.07mA is available for operation.