All Products

SN74GTLP1395DWE4

Surface Mount 20 pinsTube 3.3V VVoltage Translators & Level Shifters Mixed Signal 20-SOIC (0.295, 7.50mm Width) Obsolete 1 (Unlimited)

Manufacturer: Texas Instruments
Origchip NO: 815-SN74GTLP1395DWE4
Package: 20-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 351
Description: Surface Mount 20 pinsTube 3.3V VVoltage Translators & Level Shifters Mixed Signal 20-SOIC (0.295, 7.50mm Width) Obsolete 1 (Unlimited) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Weight	500.709277mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Series	74GTLP
JESD-609 Code	e4
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.3V
Base Part Number	74GTLP1395
Pin Count	20
Output Type	Tri-State, Inverted
Operating Supply Voltage	3.3V
Polarity	Non-Inverting
Number of Channels	2
Max Supply Voltage	3.45V
Min Supply Voltage	3.15V
Number of Ports	2
Number of Bits	1
Propagation Delay	8.1 ns
Turn On Delay Time	9.7 ns
Logic Function	Transceiver, Translator
Output Characteristics	3-STATE
Logic IC Type	BUS TRANSCEIVER
Channel Type	Bidirectional
Control Type	INDEPENDENT CONTROL
Output Signal	GTLP
Translator Type	Mixed Signal
Input Signal	LVTTL
Channels per Circuit	1
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

SN74GTLP1395DWE4 Overview

In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded.This package has the format of Tube.Level translators uses Tri-State, Inverted as the output.Its translator type is Mixed Signal.Surface Mount is the way in which this electronic part is mounted.In this electrical device, the Channel type is Bidirectional.During operation, the temperature is set to -40°C~85°C TA.0 terminations are used to end transmission lines.Based on this base part number 74GTLP1395, its related parts can be identified.Power comes from a voltage of 3.3V.The device has a pin count of 20.There is one device in the 74GTLP series, and it belongs to that series.In addition, it is designed with a pin number of 20.Electronic parts with 1 bits are designed for this application.3.45V is the maximum supply voltage it can handle.There is a minimum supply voltage of 3.15V for it.The way of mounting this electronic part is Surface Mount.2 is the number of channels.I would classify it as part of the group of Bus Driver/Transceivers.Level translators uses the logic IC BUS TRANSCEIVER.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.A high level of efficiency is achieved by maintaining the supply voltage at 3.3V.