All Products

View All >>

74LVC1G66GS,132

4.2ns, 5ns SPST - NO 10Ohm DUAL Analog Switches 74LVC1G66 5μA 3.3V 6-XFDFN

Manufacturer: Nexperia USA Inc.
Origchip NO: 554-74LVC1G66GS,132
Package: 6-XFDFN
Datasheet: PDF
Stock: 665
Description: 4.2ns, 5ns SPST - NO 10Ohm DUAL Analog Switches 74LVC1G66 5μA 3.3V 6-XFDFN(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	13 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-XFDFN
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Resistance	15Ohm
Terminal Finish	Tin (Sn)
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.35mm
Base Part Number	74LVC1G66
Polarity	Non-Inverting
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	200μA
Number of Ports	2
Number of Bits	1
Throw Configuration	SPST
Propagation Delay	3 ns
Family	LVC/LCX/Z
Supply Type	Single
Logic IC Type	BUS DRIVER
-3db Bandwidth	500MHz
On-State Resistance (Max)	10Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	6.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	4.2ns, 5ns
Charge Injection	7.5pC
Voltage - Supply, Single (V+)	1.65V~5.5V
Height Seated (Max)	0.35mm
RoHS Status	ROHS3 Compliant

74LVC1G66GS,132 Overview

Due to its 6-XFDFN packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 6. With a 3.3V voltage supply, the electrical component should be turned on and run. These analog multiplexers are built based on SPST - NO switching circuits. A total of 1 circuits make up this switch device. Try searching with 74LVC1G66 to find analog multiplexer variants. This digital multiplexer has 15Ohm internal resistance. You can find the functions of the 6 pins in the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 200μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. 1-bit operation is possible.