72V835L10PF8

72V835L10PF8 Overview

You will find FIFO memory chip in the TQFP package.Mounting it in Surface Mount is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains a total of 128 terminations.As far as the operation pins are concerned, they are 128 pins.In order to operate FIFO design, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.There are a total of 128 pins on this FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 100MHz .During regular operation, 100MHz is the FIFO memory's maximum value.

72V835L10PF8 Features

FIFOs category
Frequency at most

72V835L10PF8 Applications

There are a lot of Integrated Device Technology (IDT) 72V835L10PF8 FIFOs Memory applications.

• Consumer
• Network bridges
• Rate buffers
• Disk Controllers
• Data-acquisition systems
• Transistors
• Code converters
• Multi-stage synchronizer
• Firmware loaders
• Networking